Ukufakwa Kokhonkolo Okuqhubekayo
Isiteshi Se-Strut Esikhonkoloziyisixazululo esifanele sama-anchor afakwe kalula ezisekelweni zekhonkrithi. Zenziwe ngensimbi egoqekile ebandayo futhi zitholakala ku-Pre-Galvanized (PG), Hot-Dip Galvanized (HD), kanye ne-Stainless Steel finishes (uhlobo 316 [ST6] noma 304 [ST4]), ama-insert ethu aklanyelwe ukusebenza okuphezulu nokuthembeka kuzo zonke izinhlelo zokusebenza kuzo zonke izimboni zokwakha nezobunjiniyela bezokwakha.
Izithako zethu zifakwa kalula ngaphandle kothuli, umsindo, noma izinhlansi zezinye izindlela zokunamathisela. Imichilo yepulasitiki esuswa kalula noma ukugcwalisa i-Ethafoam kuvimbela ukhonkolo ukuthi ungangeni emseleni ngesikhathi sokuthululwa, kanti amantongomane e-strut ajijekile avumela izikhundla zokunamathisela ezilungisekayo emseleni.
IZINGAUkufakwa Kokhonkolo
Ama-Strut Spot Concrete Inserts kanye nama-Concrete Inserts aqhubekayo anikeza amandla okuthwala umthwalo athembekile futhi kulula ukuwafaka.
Ama-Spot inserts afaneleka kakhulu kuma-hangers asekela ipayipi elilodwa noma anjenge-trapeze anomthwalo omkhulu ovumelekile wamakhilogremu angu-800 uma esetshenziswa nama-Flex-Strut FS-7025-1/2" faka ama-nuts ayisikwele noma amakhulu (athengiswa ngokwehlukana). Ama-nuts ayisikwele angu-1/4" kanye no-3/8" nawo ayatholakala uma ecelwa.
Izithako eziqhubekayo zingafakwa ophahleni noma odongeni ukuze kusetshenziswe izinhlelo ezahlukene. Kuye ngobukhulu bomkhiqizo, izithako zethu zinikeza imithwalo ephezulu evumelekile kusukela kumakhilogremu angu-800 kuya ku-2,000 ngonyawo, futhi zinga-odwa ngobude obufika kumamitha angu-20.
UMSEBENZI ONZIMAUkufakwa Kokhonkolo
Uma umsebenzi udinga umthwalo osindayo, izinhlelo zokusebenza eziqondile, njengezindonga zamakhethini noma ukugcinwa kwengilazi/amatshe, onjiniyela bethu bangakusiza ekwakheni izifakelo zekhonkrithi ezisindayo ukuze kuhlangatshezwane nezidingo zakho zomsebenzi.
Izithako zethu zekhonkrithi ezisindayo ziyi-Hot-Dip Galvanized futhi ziza nezimbozo zokugcina zekhonkrithi, umugqa wokuvala wepulasitiki, kanye nezikhonkwane ezinekhanda ukuze kube nekhonkrithi evikelekile. Ubude nobubanzi bezikhonkwane eziningi buyatholakala ngokusekelwe ezidingweni zokulayisha. Uma zifakwe kahle, izithako zethu zekhonkrithi ezisindayo zilungele izinhlobo ezahlukene zemithwalo esindayo kanye nezinhlelo zokusebenza ezincane zebanga, okuhlanganisa:
- Udonga lwamakhethini, izitini, amatshe, kanye nezakhiwo zangaphambili ezibunjiwe
- Izingxenye zensimbi zesakhiwo nezakhiwo
- Izinsizakalo zemishini kanye nogesi
- Ukunamathela komshini/impahla
- Izingxenye ze-elevator kanye ne-escalator
I-Concrete Insert ilungele izakhiwo zokubambelela kanye nezisekelo kukhonkolo. Lo mkhiqizo uvumela ukufakwa okulula ngaphambi kokuba ikhonkolo ithululwe, kanye nokunamathiselwa noma kuphi ngobude bayo kusetshenziswa i-1-5/8" Fittings, ama-Channel Nuts noma eminye imikhiqizo. Ilungele izinhlelo zokusebenza ezingadinga ukulungiswa kabusha noma ukunamathiselwa kabusha.
Lo mkhiqizo ungasetjenziselwa ukubambelela ophahleni, phansi noma ezindongeni. Njengoba ufakwa ngaphambi kokuthululwa, ulungele ukusetshenziswa okunezinkinga zekhonkrithi ephukile futhi ugwema ukudalwa kwe-Silica Dust ngesikhathi sokufakwa. Uvunyelwe futhi yi-OPA ukusetshenziswa kwe-bracing yokuzamazama komhlaba.
Ubukhulu besiteshi bungu-1 5/8" ububanzi x 1 3/8" ukujula x 12 ga. Ubukhulu bamathebhu okushumeka bubekwe ku-8" OC futhi bunobubanzi obungu-2-7/8". Umkhiqizo unganikezwa ngama-Back Plates, ama-End Caps kanye ne-Closure Strip ukuvimbela ukuvuza kwekhonkrithi ku-channel, ngokwezinketho ezingezansi.
I-Concrete Insert yethu itholakala nge-Pre-Galvanized (PG), i-Hot-Dip Galvanized (HG), kanye ne-Plain (PL).
| P3370NC | Amafidi angu-20 (6,096) | PG | 27.75 |
| P3370NC | Amafidi angu-20 (6,096) | PL | 27.75 |
| I-P3370W | Amafidi angu-20 (6,096) | SS | 27 |
| P3370WC | Amafidi angu-20 (6,096) | PG | 27.75 |
| P3370WC | Amafidi angu-20 (6,096) | PL | 27.75 |
| I-P3370X | Amafidi angu-20 (6,096) | PG | 29.6 |
| I-P3370X | Amafidi angu-20 (6,096) | HG | 31.38 |
| I-P3370X | Amafidi angu-20 (6,096) | PL | 29.6 |
| I-P3370X | Amafidi angu-20 (6,096) | SS | 29.8 |
| I-P3370X | Amafidi angu-20 (6,096) | ST | 29.8 |
Imininingwane:
- Kufaka phakathi ukuvala kanye nokuvala ngaphandle kokuthi kucelwe ngenye indlela.
- Isivalo sokugcina se-P3380 esisetshenziswa ngebanga eliya esikhonkwaneni sokuqala sifinyelela ku-2" (51 mm).
- Isivalo sokugcina se-P3703 sisetshenziswa uma ibanga lokugcina ukuya ku-anchor yokuqala lingaphezu kwama-2" (51 mm).
- Izikhonkwane noma izikhonkwane ezifakwayo ukuze zibe yizimo njalo ngemva kwamasentimitha angu-16 (406.4 mm) kuya kwangu-24 (609.6 mm).
- Izikhonkwane zingamasentimitha angu-8 (203.3 mm) phakathi nendawo.
Izinketho:
- Isijobelelo "se-NC" - Akukho Mcu Wokuvala, oneziqongo Zokugcina namapuleti Angemuva
- Isijobelelo "se-WC" - Esine-Closure Strip, Ama-End Caps nama-Back Plate
- Isijobelelo "X" - Akukho Mcu Wokuvala, akukho Zimbobo Zokugcina, Namapuleti Angemuva
